Stucco Removal is a process of stripping the existing stucco from your walls. This process is often necessary to address underlying issues like mold and moisture intrusion.
To start, you need a few tools and supplies. The basics include a stiff-bristle brush, hammer, and chisel. You also need plastic sheeting, which helps keep debris and dust from contaminating the surrounding area.
Doing a do-it-yourself application for stucco removal may seem like an exciting project, but it is a lot of work and not recommended for homeowners with no experience. To avoid costly mistakes, you should hire a professional for the job. In addition to providing a high-quality finish, a professional can save you time and money in the long run. Moreover, reputable businesses are insured and provide a warranty on their work. This means that if the stucco doesn’t adhere properly, they will correct it at no additional cost to you.
Before you start to remove stucco, it is important to clean the area. Stucco will not stick to dirty walls or ceilings, so you should remove rugs, paintings and other furniture from the area that you want to stucco. You should also cover the floor with tarps or plastic sheeting to protect it from debris. Moreover, you should wear rubber gloves and safety goggles to prevent eye injuries. You should also test the walls for asbestos, which is harmful and can cause cancer.
If you’re removing stucco from a brick building, you should start with the studs and chisel away at loose pieces of brick and mortar to make room for the new coating. Then, you can use a wire brush to get rid of any remaining stucco. It is a good idea to use slow, deliberate strokes with the wire brush, as forceful and fast ones could damage the brick facade.
Once the wall or ceiling is free of the old plaster and brick, you should apply a primer to prepare it for the new stucco coat. After the primer dries, you can begin to apply the stucco. It is best to use a Portland cement plaster, which is easier to sand than other types of plaster.
After the first layer of stucco is applied, it needs to be scratched thoroughly. Then, you can apply a second layer. After the second layer has dried, you should sand the surface to make it smooth. You should allow the plaster to dry for 48 hours before you can paint it.
Reputable Businesses
Stucco is a beautiful and versatile exterior covering that offers a wide range of customization options for your home. But, like any siding material, stucco can be susceptible to water damage. If your stucco develops cracks, stains, or mildew, it’s time to call a professional for remediation. These issues can lead to moisture penetration behind the walls and cause serious structural problems for your house.
Do-it-yourself applications may work well for small, specific areas of the wall that need repair. However, it’s always best to hire a reputable business to ensure the job is done properly. They will perform a thorough inspection of the entire surface and check the structure to make sure there are no underlying issues. If they discover any, they’ll strip the stucco and complete repairs on sheathing, framing, and insulation before reinstalling the window and door frames.
A reputable company will also add a layer of housewrap to protect the wall from future moisture penetration. This will help prevent moisture from damaging the interior of your house, causing mold and mildew that can lead to costly health problems. Stucco remediation is an investment, but it’s one that can save you from expensive repairs in the future.
Remediation is a comprehensive process that includes removing the existing stucco and replacing it with a new, weatherproof exterior. It also involves inspecting and repairing the sheathing, framing, and siding, as needed. A reputable contractor will also add new gutters, downspouts, and eavestroughs to ensure they’re in good working condition.
When you choose a reputable business, they’ll provide a warranty that guarantees their work for two years or more. They’ll also offer a full restoration service if you ever notice any damage or discoloration in the future. With these advantages, it’s easy to see why hiring a professional for stucco removal is the best way to avoid major costs in the long run.
Safety
Stucco removal is a labor-intensive and risky project that requires proper tools, safety measures, and patience. It’s possible to do the work yourself, but you must have all the right equipment and be willing to wear down your body over days or weeks. It’s also important to know how to handle the tools properly and avoid damaging windows or the underlying brick.
Begin with Edge Sections
Start by focusing on the edges of the stucco, using a hammer and chisel to chip away at the surface. Move slowly and carefully to prevent unintentional damage to the underlying structure. Continue working in controlled sections until all the stucco has been removed from the wall.
Once the stucco is removed, you can begin to clean and prep the walls for patching and repairing. The walls should be scrubbed with a stiff-bristle brush and dampened to remove dust and debris. After the wall is cleaned, you can fill in any cracks or holes with joint compound or spackling paste and allow it to dry according to the manufacturer’s instructions.
After repairing the cracks and holes, you can use a finer grit sandpaper to smooth out the patched areas and create a consistent texture. You can also apply a fresh coat of paint to the surface for a brighter appearance.
Before washing your stucco, it’s important to inspect the surface for any signs of moisture penetration or mold. Moisture infiltrating the stucco can cause mold and mildew, which can affect the structural integrity of your home and lead to costly repairs. To prevent moisture from seeping into your walls, you can use an exterior acrylic caulk that closely matches the color of your stucco.
While washing your stucco, it’s essential to protect nearby furniture and fixtures. Use plastic cloths to cover any surfaces you don’t want to get ruined by dust and stucco shavings. You should also clear the work area of any obstacles that could hinder your progress or increase the risk of accidents. Finally, make sure to properly clean and store your tools when the project is complete.
Cost
Stucco is a popular exterior covering that increases the value of homes, provides insulation and helps protect houses from natural hazards. It is also easy to maintain and has a pleasing appearance. However, a home’s stucco should not be allowed to deteriorate. A professional contractor can inspect a home’s existing stucco and make repairs where necessary. In addition, the contractor can assess whether the stucco is in good condition and determine if the project will require any additional work or materials.
It can be expensive to repair damage caused by moisture intrusion and other factors. A reputable stucco company will charge $8 to $20 per square foot for small repairs, such as filling cracks and fixing holes. The price may be higher if the cracks are wide or recurring. A DIY kit can be used to seal hairline cracks for around $30. However, if you notice multiple cracks that keep reappearing, this is a sign of an underlying problem that requires professional inspection.
In some cases, a homeowner may choose to do the repairs themselves instead of hiring a professional. However, this can be a costly mistake because it’s not uncommon to make mistakes while trying to fix the problem. Those mistakes can lead to further damage and even more expenses down the line.
Besides moisture, other factors that can cause damage to a stucco surface include fungus, mold, and dirt. Fungus and mold can create stains or peel the stucco. The damage can also be caused by storms or hail, which can crack or dent the stucco. This can leave the underlying sheathing exposed, which is then vulnerable to weather and critter damage.
If the underlying sheathing is damaged, it can be fixed at a lower cost than replacing the entire stucco surface. A stucco contractor can inspect the sheathing and remove any rust or damage that might have occurred. They can also replace the studs and headers as necessary. They should also examine the vapor barrier and metal lath to check for water damage.
It is possible to make the repairs needed for a successful stucco application, but it is important to do so in a timely manner. If not, the underlying problems can worsen and affect the entire structure of your house.